SDXPINN branch is now ipk focused

-Updated opkg-feed with new packages
-Updated key cause I lost my private key

ipk-source/luci-app-atinout-mod_1.3.4-20241006_all/root/etc/config/atcommands.user

@@ -0,0 +1,30 @@
+Reboot;AT+CFUN=1,1
+Disconnect;AT+CFUN=0
+Connect;AT+CFUN=1
+Signal Info;AT+QENG="servingcell"
+CA Info;AT+QCAINFO
+Get current SIM Slot;AT+QUIMSLOT?
+Switch to SIM Slot 1;AT+QUIMSLOT=1
+Switch to SIM Slot 2;AT+QUIMSLOT=2
+Get current APN List;AT+CGDCONT?
+Set APN to NRBROADBAND;AT+CGDCONT=1,"IPV4V6","NRBROADBAND"
+Show Current IMEI;AT+EGMR=0,7
+Show Current Network Mode;AT+QNWPREFCFG="mode_pref"
+Set Network Mode to AUTO;AT+QNWPREFCFG="mode_pref",AUTO
+Set Network Mode to 5G NR/4G LTE Only;AT+QNWPREFCFG="mode_pref",NR5G:LTE
+Set Network Mode to 5G NR Only;AT+QNWPREFCFG="mode_pref",NR5G
+Set Network Mode to 4G LTE Only;AT+QNWPREFCFG="mode_pref",LTE
+Check to see if SA or NSA is disabled;AT+QNWPREFCFG="nr5g_disable_mode"
+Enable Both SA and NSA;AT+QNWPREFCFG="nr5g_disable_mode",0
+Disable SA Only;AT+QNWPREFCFG="nr5g_disable_mode",1
+Disable NSA Only;AT+QNWPREFCFG="nr5g_disable_mode",2
+Get Currently Enabled 5G/NR SA Bands;AT+QNWPREFCFG="nr5g_band"
+Get Currently Enabled 5G/NR NSA Bands;AT+QNWPREFCFG="nsa_nr5g_band"
+Get Currently Enabled 4G/LTE Bands;AT+QNWPREFCFG="lte_band"
+View assigned IPv4/IPv6 addresses from the provider;AT+QMAP="WWAN"
+Enable IPPT paste in MAC for FF:FF:FF...;AT+QMAP="MPDN_rule",0,1,0,1,1,"FF:FF:FF:FF:FF:FF"
+Disable IPPT;AT+QMAP="MPDN_rule",0
+Set IPv4 DMZ....replace iphere;AT+QMAP="DMZ",1,4,iphere
+Set IPv6 DMZ....replace iphere;AT+QMAP="DMZ",1,6,iphere
+Disable IPv4 DMZ;AT+QMAP="DMZ",0,4
+Disable IPv6 DMZ;AT+QMAP="DMZ",0,6

ipk-source/luci-app-atinout-mod_1.3.4-20241006_all/root/etc/config/atinout

@@ -0,0 +1,4 @@
+
+config atinout 'general'
+	option atcport '/dev/smd11'
+

ipk-source/luci-app-atinout-mod_1.3.4-20241006_all/root/etc/uci-defaults/set_at_port.sh

@@ -0,0 +1,21 @@
+#!/bin/sh
+# Copyright 2020-2021 Rafał Wabik (IceG) - From eko.one.pl forum
+# Licensed to the GNU General Public License v3.0.
+
+work=false
+for port in /dev/ttyUSB*
+do
+    [[ -e $port ]] || continue
+    gcom -d $port info &> /tmp/testusb
+    testUSB=`cat /tmp/testusb | grep "Error\|Can't"`
+    if [ -z "$testUSB" ]; then 
+        work=$port
+        break
+    fi
+done
+rm -rf /tmp/testusb
+
+if [ $work != false ]; then
+uci set atinout.@atinout[0].atcport=$work
+uci commit atinout
+fi