Sync Changes with development-SDXPINN

-Updated QuecManager to 0.0.2 from PR #87

- Change-log:

https: //github.com/iamromulan/quectel-rgmii-toolkit/pull/87
Co-Authored-By: Russel Yasol <73575327+dr-dolomite@users.noreply.github.com>

ipk-source/sdxpinn-quecmanager/root/www/cgi-bin/cell-locking/test.sh

@@ -0,0 +1,120 @@
+#!/bin/sh
+# Enable debug logging
+# exec 1> >(logger -s -t $(basename $0)) 2>&1
+# Create log directory if it doesn't exist
+LOG_DIR="/var/log/quecmanager"
+mkdir -p "$LOG_DIR"
+DEBUG_LOG="$LOG_DIR/cell_lock_debug.log"
+
+# Function to log messages
+log_message() {
+    local message="$1"
+    local timestamp=$(date '+%Y-%m-%d %H:%M:%S')
+    echo "$timestamp - $message" >> "$DEBUG_LOG"
+}
+
+# Verify required tools
+if ! command -v atinout >/dev/null 2>&1; then
+    log_message "Error: atinout command not found"
+    exit 1
+fi
+
+if [ ! -c "/dev/smd11" ]; then
+    log_message "Error: Modem device /dev/smd11 not found"
+    exit 1
+fi
+
+# Function to send AT commands
+send_at_command() {
+    local command="$1"
+    local description="$2"
+    local retry_count=0
+    local max_retries=3
+    
+    log_message "Attempting to send command: $command ($description)"
+    
+    while [ $retry_count -lt $max_retries ]; do
+        echo "$command" | atinout - /dev/smd11 - > /tmp/at_response.txt 2>&1
+        local result=$(cat /tmp/at_response.txt)
+        
+        log_message "Attempt $((retry_count + 1)) - Response: $result"
+        
+        if echo "$result" | grep -q "OK"; then
+            log_message "Command successful: $description"
+            return 0
+        fi
+        
+        retry_count=$((retry_count + 1))
+        log_message "Command failed, retry $retry_count of $max_retries"
+        sleep 2
+    done
+    
+    log_message "Command failed after $max_retries retries: $description"
+    return 1
+}
+
+# Function to apply cell lock configuration
+apply_cell_lock() {
+    local config_file="/etc/quecmanager/cell_lock_config.txt"
+    
+    if [ ! -f "$config_file" ]; then
+        log_message "Configuration file not found"
+        return 1
+    fi
+    
+    # Read configuration values
+    . "$config_file"
+    
+    # Test modem responsiveness
+    if ! send_at_command "AT" "Testing modem responsiveness"; then
+        return 1
+    fi
+    
+    # Apply LTE configuration if present
+    if [ -n "$earfcn1" ] && [ -n "$pci1" ]; then
+        if ! send_at_command "AT+CFUN=0" "Setting radio off"; then
+            return 1
+        fi
+        sleep 2
+        
+        if [ -n "$earfcn2" ] && [ -n "$pci2" ]; then
+            if [ -n "$earfcn3" ] && [ -n "$pci3" ]; then
+                send_at_command "AT+QNWLOCK=\"common/4g\",3,$earfcn1,$pci1,$earfcn2,$pci2,$earfcn3,$pci3" "Setting LTE lock (3 cells)"
+            else
+                send_at_command "AT+QNWLOCK=\"common/4g\",2,$earfcn1,$pci1,$earfcn2,$pci2" "Setting LTE lock (2 cells)"
+            fi
+        else
+            send_at_command "AT+QNWLOCK=\"common/4g\",1,$earfcn1,$pci1" "Setting LTE lock (1 cell)"
+        fi
+        
+        sleep 2
+        if ! send_at_command "AT+CFUN=1" "Setting radio on"; then
+            return 1
+        fi
+    fi
+    
+    # Apply 5G configuration if present
+    if [ -n "$nrpci" ] && [ -n "$nrarfcn" ] && [ -n "$scs" ] && [ -n "$band" ]; then
+        if ! send_at_command "AT+CFUN=0" "Setting radio off"; then
+            return 1
+        fi
+        sleep 2
+        if ! send_at_command "AT+QNWLOCK=\"common/5g\",$nrpci,$nrarfcn,$scs,$band" "Setting 5G lock"; then
+            return 1
+        fi
+        sleep 2
+        if ! send_at_command "AT+CFUN=1" "Setting radio on"; then
+            return 1
+        fi
+    fi
+}
+
+# Main execution
+log_message "Starting cell lock configuration"
+if apply_cell_lock; then
+    log_message "Cell lock configuration applied successfully"
+    exit 0
+else
+    log_message "Failed to apply cell lock configuration"
+    exit 1
+fi