From d18e3be93733b56d6882e5a9516c8151e90d042b Mon Sep 17 00:00:00 2001
From: Cameron Thompson <50184035+iamromulan@users.noreply.github.com>
Date: Wed, 3 Apr 2024 21:05:08 -0400
Subject: [PATCH] Re-add useful AT commands section for now
---
simpleadmin/www/atcommander.html | 108 ++++++++++++++++++++++++++++++-
1 file changed, 107 insertions(+), 1 deletion(-)
diff --git a/simpleadmin/www/atcommander.html b/simpleadmin/www/atcommander.html
index dbbd1da..87606df 100644
--- a/simpleadmin/www/atcommander.html
+++ b/simpleadmin/www/atcommander.html
@@ -150,7 +150,113 @@
-->
-
+ Here are some useful commands:
+
+ -
+
+ See https://github.com/iamromulan/RM520N-GL#at-commands for
+ more
+
+ - AT+CFUN=1,1 (reboot)
+ -
+ AT+QMAPWAC? (get current status of auto connect, 0=disabled
+ 1=enabled)
+
+ -
+ AT+QMAPWAC=1 (enable auto connect internet for ethernet)
+
+ -
+ AT+QMAPWAC=0 (disable auto connect for ethernet; use when
+ you want internet over usb to work; IPPT must be disabled)
+
+ -
+ AT+QUIMSLOT? (get active sim slot; 1=Slot 1; 2=Slot 2)
+
+ - AT+QUIMSLOT=1 (switch to sim slot 1)
+ - AT+QUIMSLOT=2 (switch to sim slot 2)
+ - AT+CGDCONT? (Get active APN profle list 1 through 8)
+ -
+ AT+CGDCONT=1,"IPV4V6","APNHERE" (Sets APN profle 1 to
+ APNHERE using both IPV4 and IPV6)
+
+ - AT+GSN (Show current IMEI)
+ - AT+EGMR=1,7,"IMEIGOESHERE" (sets/repairs IMEI)
+ - AT+QCAINFO (Show all connected bands/CA info)
+ -
+ AT+QNWPREFCFG="mode_pref" (Check what the current network
+ search mode is set to)
+
+ -
+ AT+QNWPREFCFG="mode_pref",AUTO (Set network search mode to
+ automatic)
+
+ -
+ AT+QNWPREFCFG="mode_pref",NR5G:LTE (Set network search mode
+ to 5G/NR and 4G/LTE only)
+
+ -
+ AT+QNWPREFCFG="mode_pref",NR5G (Set network search mode to
+ 5G/NR only)
+
+ -
+ AT+QNWPREFCFG="mode_pref",LTE (Set network search mode to
+ 4G/LTE only)
+
+ -
+ AT+QNWPREFCFG="nr5g_disable_mode" (Check to see if SA or NSA
+ NR5G is disabled)
+
+ -
+ AT+QNWPREFCFG="nr5g_disable_mode",0 (Enable Both SA and NSA
+ 5G/NR)
+
+ -
+ AT+QNWPREFCFG="nr5g_disable_mode",1 (Disable SA 5G/NR only)
+
+ -
+ AT+QNWPREFCFG="nr5g_disable_mode",2 (Disable NSA 5G/NR only)
+
+ -
+ AT+QNWPREFCFG="nr5g_band" (Get current 5G/NR bandlock
+ settings)
+
+ -
+ AT+QNWPREFCFG="nr5g_band",1:2:3:4:5:6 (Example: Lock to
+ 5G/NR bands n1,n2,n3,n4,n5, and n6)
+
+ -
+ AT+QNWPREFCFG="lte_band" (Get current 4G/LTE bandlock
+ settings)
+
+ -
+ AT+QNWPREFCFG="lte_band",1:2:3:4:5:6 (Example: Lock to
+ 4G/LTE bands 1,2,3,4,5, and 6)
+
+ -
+ AT+QMAP="WWAN" (Show currently assigned IPv4 and IPv6 from
+ the provider)
+
+ -
+ AT+QMAP="LANIP" (Show current DHCP range and Gateway address
+ for VLAN0)
+
+ -
+ AT+QMAP="LANIP",IP_start_range,IP_end_range,Gateway_IP (Set
+ IPv4 Start/End range and Gateway IP of DHCP for VLAN0)
+
+ -
+ AT+QMAP="DHCPV4DNS","disable" (disable the onboard DNS
+ proxy; recommended for IPPT)
+
+ -
+ AT+QMAP="MPDN_rule",0,1,0,1,1,"FF:FF:FF:FF:FF:FF" (Turn on
+ IP Passthrough for Ethernet)
+
+ -
+ AT+QMAP="MPDN_rule",0 (turn off IPPT/clear MPDN rule 0;
+ Remember to run AT+QMAPWAC=1 and reboot after)
+
+