Add atcmd11

Separate commands for separate AT streams

simpleupdates/scripts/update_socat-at-bridge.sh

@@ -88,6 +88,7 @@ install_at_socat() {
     wget https://raw.githubusercontent.com/$GITUSER/quectel-rgmii-toolkit/$GITTREE/socat-at-bridge/socat-armel-static
     wget https://raw.githubusercontent.com/$GITUSER/quectel-rgmii-toolkit/$GITTREE/socat-at-bridge/killsmd7bridge
     wget https://raw.githubusercontent.com/$GITUSER/quectel-rgmii-toolkit/$GITTREE/socat-at-bridge/atcmd
+	wget https://raw.githubusercontent.com/$GITUSER/quectel-rgmii-toolkit/$GITTREE/socat-at-bridge/atcmd11
     cd $SOCAT_AT_SYSD_DIR
     wget https://raw.githubusercontent.com/$GITUSER/quectel-rgmii-toolkit/$GITTREE/socat-at-bridge/systemd_units/socat-smd11.service
     wget https://raw.githubusercontent.com/$GITUSER/quectel-rgmii-toolkit/$GITTREE/socat-at-bridge/systemd_units/socat-smd11-from-ttyIN.service
@@ -102,9 +103,11 @@ install_at_socat() {
     chmod +x socat-armel-static
     chmod +x killsmd7bridge
     chmod +x atcmd
+	chmod +x atcmd11
 	
     # Link new command for AT Commands from the shell
     ln -sf $SOCAT_AT_DIR/atcmd /bin
+	ln -sf $SOCAT_AT_DIR/atcmd11 /bin
 	
     # Install service units
     echo -e "\033[0;32mAdding AT Socat Bridge systemd service units...\033[0m"

socat-at-bridge/atcmd11

@@ -0,0 +1,69 @@
+#!/bin/bash
+
+DEVICE=/dev/ttyOUT
+BAUD=115200
+
+# Function to setup device communication parameters
+setup_device() {
+    stty -F $DEVICE cs8 $BAUD ignbrk -brkint -icrnl -imaxbel \
+        -opost -onlcr -isig -icanon -iexten -echo -echoe -echok \
+        -echoctl -echoke noflsh -ixon -crtscts
+}
+
+# Function to send AT command and capture the output
+send_at_command() {
+    local command="$1"
+    
+    # Clear the device buffer before sending a new command
+    echo -n > $DEVICE
+
+    # Send the AT command, preserving the integrity of the input
+    echo -e "$command\r" > $DEVICE
+
+    # Use a temporary file to capture the command output
+    tmpfile=$(mktemp)
+    
+    # Start reading the device output to the temporary file
+    cat $DEVICE > "$tmpfile" &
+    CAT_PID=$!
+
+    # Monitor the output file for "OK" or "ERROR"
+    while ! grep -qe "OK" -e "ERROR" "$tmpfile"; do
+        sleep 1
+    done
+
+    # Kill the `cat` process after capturing the response
+    kill $CAT_PID
+    wait $CAT_PID 2>/dev/null
+
+    # Display the response
+    cat "$tmpfile" | while IFS= read -r line; do
+        echo -e "\033[0;32m$line\033[0m"
+    done
+
+    # Clean up
+    rm "$tmpfile"
+}
+
+# Prepare the device for communication
+setup_device
+
+# Check if an AT command is provided as an argument
+if [ $# -gt 0 ]; then
+    # Concatenate all arguments to handle commands with spaces and/or quotes correctly
+    FULL_CMD="$*"
+    send_at_command "$FULL_CMD"
+else
+    echo -e "\033[0;36mType 'exit' to end the session.\033[0m"
+    while true; do
+        echo -en "\033[0;36mEnter AT Command: \033[0m"
+        read user_input
+
+        if [[ "$user_input" == "exit" ]]; then
+            echo -e "\033[0;32mExiting...\033[0m"
+            break
+        fi
+
+        send_at_command "$user_input"
+    done
+fi